Southbend (Middleby)

Southbend Platinum Heavy Duty 48-Inch Gas Plancha Range with Convection Oven and Storage Cabinet

SKU: P48A-PPPP
$21,583.00
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Southbend Platinum Heavy Duty 48-Inch Gas Plancha Range with Convection Oven and Storage Cabinet

41-3/4-Inch Plancha, 1/2-Inch Plate, Manual Controls, 128,000 BTU

This heavy-duty sectional range pairs a high-output plancha griddle with a convection oven base and storage cabinet for a versatile, space-saving cookline.

  • 48-inch sectional gas range with a 41-3/4-inch plancha griddle and 1/2-inch reinforced plate.
  • Convection-oven base includes 3 oven racks and a 45,000 BTU oven.
  • Manual control knobs and battery spark ignition support straightforward operation.
  • Stainless steel construction, splashers, grease drawer, and a 5-inch front rail help withstand busy service.
  • 6-inch adjustable legs and front/rear gas connections simplify installation.

Overall Dimensions:

48.0"W x 40.25"D x 41.0"H

Product Weight:

840.0 lb

41-3/4-Inch Plancha Griddle

Raised 1/2-inch thick reinforced steel plate provides a large cooking surface that is easy to clean between loads.

High-Heat Cooking Zone

The front two-thirds of the plate reaches high temperatures for quick searing, while the rear area is better suited for finishing.

Manual Plancha Controls

Four manual control knobs give the operator direct burner control for the griddle section.

Battery Spark Ignition

Battery spark ignition helps provide dependable burner startup without requiring a standing pilot for the griddle section.

Convection Oven Base

The base includes a 45,000 BTU convection oven with standing pilot, a thermostat range from 175°F to 550°F, and a two-speed 1/2 hp blower motor.

Included Oven Racks

The convection oven model includes three oven racks with five-position side rails.

Stainless Steel Construction

Front, sides, rear, and exterior bottom are stainless steel for durability in demanding kitchens.

Grease and Splash Management

A removable stainless steel grease drawer, side splashers, rear splasher, and 5-inch deep front rail help contain messes.

Adjustable Legs

Standard 6-inch stainless steel adjustable legs help with leveling during installation.

Gas Utility Connections

The unit uses a 1-1/4-inch front gas manifold and 1-inch rear gas connection and requires a regulated gas supply.

Type Plancha Griddle Range
Style Sectional
Installation Type Floor Model
Material Stainless Steel
Interior Finish Porcelain Enamel
Finish #3 Polished
Controls Manual
BTU 128,000 BTU
Gas Connection Size 1-1/4 Inch Front Manifold; 1 Inch Rear Gas Connection
Gas Inlet Pressure 7 Inches W.C. Natural Gas; 11 Inches W.C. Propane
Cooking Surface Width 41-3/4 Inches
Shipping Width 55 Inches
Shipping Depth 55 Inches
Shipping Height 45 Inches
Shipping Weight 840 Pounds
Country of Origin USA
Selling Unit Each
Units Per Case 1

Certifications & Compliance

Certified badge of NSF Certified
NSF Certified
Certified badge of CSA Certified
CSA Certified

Warranty & Protection

1-year parts and 1-year labor limited warranty

Frequently Asked Questions

No. The documentation states that plancha units do not allow specific temperature operation.
The convection-oven base includes 3 racks, a standing pilot, a 175°F to 550°F thermostat range, and a two-speed 1/2 hp blower motor.
It uses a 1-1/4-inch front manifold and a 1-inch rear gas connection. A regulated gas supply is required.
Minimum gas supply pressure is 7 inches W.C. for natural gas and 11 inches W.C. for propane.
Minimum clearance from combustible construction is 10 inches on the sides and 12 inches on the rear. Installation under a vented hood is recommended.
The cut sheet states a 1-year limited parts and labor warranty.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.