Key specifications
- Dimensions
- 23.75"W × 32.0"D × 37.25"H
- Type
- Steam Kettle
- Style
- Stationary
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
- Capacity
- 25 Gallons
Spec sheet
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Southbend KEPS-25 is a 25-gallon electric stationary steam kettle with a pedestal base and a steam jacket around the lower two-thirds of the kettle.
Thermostatic control supports operation across a listed temperature range of 165°F to 285°F. Standard features include a 2-inch sanitary draw-off valve with perforated strainer, spring-assisted hinged stainless steel domed cover, and faucet bracket.
- All-welded 304 stainless steel construction with a #4 finish.
- Self-generating closed steam system with removable elements.
Overall Dimensions:
23.75"W x 32.0"D x 37.25"HProduct Weight:
175.0 lbElectric Operation
Self-generating closed steam system operating electrically.
2/3 Steam Jacket
Double-wall kettle interior forms a steam jacket around the lower 2/3 of the kettle.
Thermostatic Control
Controls include a thermostat, power switch, pilot light, low-water light, vacuum/pressure gauge, safety relief valve and low-water shutoff.
Draw-Off Assembly
2-inch sanitary draw-off valve with perforated strainer.
Hinged Cover
Spring-assisted hinged stainless steel domed cover.
Pedestal Base
Pedestal base with four 7/16-inch holes for securing the unit to the floor.
Stainless Steel Construction
All-welded 304 stainless steel construction with a #4 finish.
Removable Elements
Standard removable heating elements.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.