Key specifications
- Dimensions
- 36.0"W × 33.0"D × 62.13"H
- Type
- Steam Kettle Assembly
- Style
- Direct Steam
- Installation Type
- Floor Model
- Material
- Stainless Steel
- Finish
- No. 4
Spec sheet
Southbend Steam DMT-6S-6 Direct Steam Kettle/Cabinet Assembly with (2) 6-Gallon Tilting Kettles, 36-Inch Base and Sink
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Southbend DMT-6S-6 is a direct steam kettle/cabinet assembly with two 6-gallon tilting kettles mounted on a 36-inch cabinet base.
- Includes 316 stainless steel kettle liners, a steam control valve, a deck-mount hot and cold water faucet, and a 3-inch-deep sink with drain and splash guard.
- The stainless steel cabinet has 6-inch stainless steel legs with adjustable flanged feet.
- Direct steam operation is specified for a supply pressure of 5–45 PSI.
Overall Dimensions:
36.0"W x 33.0"D x 62.13"HProduct Weight:
350.0 lbDirect Steam Operation
The kettles operate with direct steam at a specified supply pressure of 5–45 PSI, with 1/4 BHP required per kettle.
Tilting Kettles
The two kettles are tilting models; the mounting legs allow the kettle to tilt forward past 90° for emptying.
316 Stainless Steel Liners
Each kettle has a 316 stainless steel liner.
Integrated Water Fixtures
The cabinet includes a deck-mount hot and cold water faucet with control valves and a 3-inch-deep sink with drain and splash guard.
Cabinet Base
The assembly has a 36-inch stainless steel cabinet base with 6-inch stainless steel legs and adjustable flanged feet.
Code-Stamped Kettles
Each kettle is specified as ASME code stamped and National Board registered.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.