Key specifications
- Dimensions
- 24.0"W × 33.0"D × 62.13"H
- Type
- Kettle Assembly
- Style
- Direct Steam
- Installation Type
- Floor Model
- Material
- Stainless Steel
- Finish
- #4 Finish
Spec sheet
Southbend Steam DMT-10S-10 Direct Steam Kettle/Cabinet Assembly, Two 10-Gallon Tilting Kettles, 316 Stainless Steel Liners
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Southbend DMT-10S-10 is a direct steam kettle/cabinet assembly with two 10-gallon tilting kettles, 2/3 steam jackets, and 316 stainless steel liners.
- Includes a steam control valve, hot and cold water fill faucet, and 3-inch-deep stainless steel sink with splash guard.
- The stainless steel cabinet has a #4 finish, removable side panels, hinged doors with magnetic latches, and a 24-inch-wide cabinet base.
- Each kettle tilts forward past 90 degrees for emptying and is supported by 6-inch stainless steel legs with adjustable flanged feet.
Overall Dimensions:
24.0"W x 33.0"D x 62.13"HProduct Weight:
245.0 lbDirect Steam Operation
Designed for incoming steam at a minimum of 5 PSI and a maximum of 45 PSI.
Two Tilting Kettles
Includes two 10-gallon tilting kettles.
2/3 Steam Jackets
Each kettle has a steam jacket around the lower two-thirds of the kettle.
316 Stainless Steel Liners
Each kettle liner is made of 316 stainless steel.
Water Fill and Sink
Includes a hot and cold water fill faucet plus a 3-inch-deep stainless steel sink with drain and splash guard.
Stainless Steel Cabinet
The cabinet has stainless steel construction with a #4 finish, removable side panels, and hinged doors with magnetic latches.
Forward Tilting
The kettles tilt forward past 90 degrees for emptying.
Adjustable Floor Support
The assembly is mounted on 6-inch stainless steel legs with adjustable flanged feet.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.