Key specifications
- Dimensions
- 36.0"W × 33.0"D × 42.5"H
- Type
- Steam Kettle
- Style
- Stationary
- Installation Type
- Floor Model
- Material
- Stainless Steel
- Capacity
- 40 Gallons
Spec sheet
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
Southbend DMS-40S is a stationary 40-gallon direct steam kettle with a 2/3 jacket and 316 stainless steel interior liner.
- Steam operation: Direct steam with a steam control valve and steam trap.
- Draw-off: 2-inch draw-off with a perforated strainer and swing drain.
- Water fill: Hot and cold deck-mounted fill faucet.
- Construction: Stainless steel cabinet base, one-piece spring-assisted cover, 6-inch stainless steel legs, and adjustable flanged feet.
- Includes a pan support and is certified to NSF and cCSAus standards.
Overall Dimensions:
36.0"W x 33.0"D x 42.5"HProduct Weight:
475.0 lbDirect Steam Cooking
Uses direct steam with a steam control valve and steam trap.
2/3 Jacket
The kettle has a steam jacket around the lower two-thirds of the kettle.
316 Stainless Steel Liner
The interior liner is 316 stainless steel.
Draw-Off and Strainer
Includes a 2-inch draw-off with a perforated strainer and swing drain.
Deck-Mounted Fill Faucet
Includes a hot and cold deck-mounted fill faucet.
Spring-Assisted Cover
Includes a one-piece stainless steel spring-assisted cover.
Cabinet Base
Includes a stainless steel cabinet base with 6-inch stainless steel legs and adjustable flanged feet.
Pan Support
Includes a pan support.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.