Key specifications
- Dimensions
- 72.0"W × 30.0"D × 44.5"H
- Type
- Clean Dish Table
- Style
- Straight
- Installation Type
- Floor Model
- Material
- Stainless Steel
- Top Material
- 304 Stainless Steel
Spec sheet
Sapphire SMCDT-72R 72-Inch Straight Left-to-Right Clean Dish Table, 16-Gauge 304 Stainless Steel Top, 10-1/2-Inch Backsplash
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Sapphire SMCDT-72R is a straight clean dish table with left-to-right operation. It measures 72 inches wide by 30 inches deep by 44.5 inches high overall.
Its 16-gauge 304 stainless steel top includes a 10-1/2-inch backsplash and 1-1/2-inch rolled front and side rims. The table has stainless steel legs with a welded cross brace and adjustable bullet feet. It ships knocked down for assembly and is NSF certified.
Overall Dimensions:
72.0"W x 30.0"D x 44.5"HProduct Weight:
165.0 lbLeft-to-Right Operation
Configured for left-to-right dish handling workflow.
Straight Design
Straight clean dish table design.
304 Stainless Steel Top
The top is fabricated from 16-gauge 304 stainless steel.
Backsplash
Includes a 10-1/2-inch-high backsplash.
Rolled Front And Side Rims
Front and side rims are 1-1/2 inches and rolled.
Stainless Steel Leg Assembly
Stainless steel legs include a welded cross brace and adjustable bullet feet.
Knockdown Construction
Ships knocked down for assembly.
NSF Certification
Certified to NSF standards.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.