Key specifications
- Dimensions
- 36.0"W × 30.0"D × 44.5"H
- Type
- Clean Dish Table
- Style
- Straight
- Installation Type
- Floor Model
- Material
- Stainless Steel
- Direction
- Left To Right
Spec sheet
Sapphire SMCDT-36R Straight Clean Dish Table, 36 x 30 Inch, Left-to-Right, 16-Gauge 304 Stainless Steel, 10-1/2-Inch Backsplash
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
Sapphire SMCDT-36R is a straight clean dish table designed for left-to-right operation.
- 36 inches wide by 30 inches deep by 44.5 inches high overall
- 16-gauge 304 stainless steel top with 1-1/2-inch rolled front and side rims
- 10-1/2-inch-high backsplash
- Stainless steel legs with a welded cross brace and adjustable bullet feet
- Ships knock-down for assembly
- NSF certified
Overall Dimensions:
36.0"W x 30.0"D x 44.5"HProduct Weight:
140.0 lbLeft-to-Right Operation
Configured for left-to-right operation.
304 Stainless Steel Top
The top is fabricated from 16-gauge 304 stainless steel.
Backsplash
Includes a 10-1/2-inch-high backsplash.
Rolled Rims
The front and side rims are rolled and measure 1-1/2 inches.
Leg Assembly
Stainless steel legs include a welded cross brace and adjustable bullet feet.
Knock-Down Construction
The table ships knock-down for assembly.
Brush Finish
Exposed welded areas are polished to a sanitary #4 brush finish.
NSF Certification
Certified to NSF standards, including NSF STD.2.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.