Key specifications
- Dimensions
- 24.81"W × 22.25"D × 35.88"H
- Type
- Scrap Collector
- Style
- Standard
- Installation Type
- Floor Model
- Material
- Stainless Steel
- Motor Horsepower
- 3/4 HP
Spec sheet
Salvajor S914 Scrap Collector System with NEMA 4 Control Panel, 3/4 HP Corrosion-Resistant Pump, Stainless Steel
- Scrap collector
- Pot/pan scrap collector
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Salvajor S914 is a floor-model scrap collector for scrapping, pre-flushing, and collecting food waste. Its recirculating water plume pre-rinses dishes while food waste moves into the scrap basket; soluble waste passes into the tank reservoir and insoluble and fibrous waste remains in the basket.
The system features stainless steel construction, a NEMA 4 HydroLogic control panel with patented operator sensor, two water-saving modes, LCD readout, salvage basin and silverware trap, and a 3/4 HP corrosion-resistant pump.
- One scrap basket is provided with the unit.
- Safety line disconnect and pump intake screen included.
Overall Dimensions:
24.81"W x 22.25"D x 35.88"HProduct Weight:
145.0 lbScrapping and pre-flushing
Recirculated water creates a plume that scrapes and pre-rinses dishes at the same time.
Food waste collection
The scrap basket retains insoluble and fibrous waste while soluble food waste passes into the tank reservoir.
HydroLogic control panel
The pre-wired NEMA 4 control panel includes a patented operator sensor and LCD readout.
Water-saving modes
Provides timed run and automatic start/stop modes.
Corrosion-resistant pump
Includes a 3/4 HP pump with a pump intake screen and non-clogging pump design.
Scrap handling components
Includes a salvage basin, silverware trap, and one scrap basket.
Safety disconnect
Includes a safety line disconnect and 24-volt safety circuitry.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.