Key specifications
- Dimensions
- 36.5"W × 22.25"D × 35.88"H
- Type
- Scrap Collector
- Style
- Pot/Pan
- Installation Type
- Floor Model
- Material
- Stainless Steel
- Basin Material
- High Impact Polymer
Spec sheet
Salvajor P914 Pot/Pan Scrap Collector with Pre-Flushing System, 3/4 HP Pump, Stainless Steel, NEMA 4 Control Panel
- Pot/pan scrap collector
- Scrap collector system
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Salvajor P914 Pot/Pan Scrap Collector combines scrapping, pre-flushing, and food waste collection in a stainless steel floor-model system for applications where food waste disposers are restricted.
- HydroLogic control: NEMA 4 control panel with a patented operator sensor, LCD readout, and two water-saving modes.
- Waste collection: Salvage basin, silverware trap, and scrap basket collect insoluble and fibrous waste while soluble food waste washes through the basket.
- Pump system: 3/4 HP corrosion-resistant pump with a pump intake screen and non-clogging design.
- Construction: Stainless steel tank, adjustable legs, and control panel.
Overall Dimensions:
36.5"W x 22.25"D x 35.88"HProduct Weight:
153.0 lbPot/Pan Scrap Collection
Collects food waste while pots, pans, dishes, and cookware are scrapped and pre-rinsed.
HydroLogic Control Panel
The NEMA 4 panel includes a patented operator sensor, LCD readout, and safety line disconnect.
Water-Saving Modes
Provides timed run and automatic start/stop modes.
Corrosion-Resistant Pump
Uses a 3/4 HP pump with a non-clogging design and pump intake screen.
Waste Separation
The scrap basket retains insoluble and fibrous waste while soluble food waste washes through into the tank reservoir.
Stainless Steel Construction
The tank, adjustable legs, and control panel are stainless steel.
Utility Connections
Requires 3/4 in hot and cold water reduced to 1/2 in at the connection, plus a 2 in NPT tank drain.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.