Salvajor 300-CA-WSP-P 3 HP Commercial Garbage Disposer with Water-Saving Package, Operator Sensor, 6-1/2" Inlet

SKU: 300-CA-WSP-P
$6,393.60
/each
Enter ZIP for a shipping estimate

Want to speak to an expert?

3 HP food waste disposer with a cone assembly, 6-1/2-inch inlet, Water Saving Package, operator sensor, and ARSS-LD control.

  • The operator sensor adjusts water flow based on operator presence and can power off the disposer after an adjustable run time.
  • The control includes automatic reversing, drain flush, start/stop push buttons, water-saving mode, and a line disconnect.
  • The disposer includes a fixed nozzle, chrome-plated vacuum breaker, and scrap ring.
  • The housing is made from heat-treated, corrosion-resistant aluminum alloy.

Product Weight:

144.0 lb

Water Saving Package

The operator sensor detects operator presence or absence, adjusts water flow, and can power off the disposer when the adjustable run timer expires.

ARSS-LD control

Includes automatic reversing, drain flush, start/stop push buttons, water-saving mode, user-adjustable run time, and line disconnect.

Automatic reversing

The disposer is designed to operate in either direction, with rotation controlled by automatic reversing controls.

Cone assembly

The product is specified with a cone assembly.

Included components

Includes a fixed nozzle, chrome-plated vacuum breaker, and scrap ring.

Aluminum housing

Heat-treated, corrosion-resistant aluminum alloy housing.

Water-cooled motor

Totally enclosed motor with water cooling and built-in manual reset thermal overload protection.

Single support leg

Single support leg for the disposer assembly.

Horsepower 3 HP
Electrical Phase 3 phase
Assembly Cone assembly
Inlet Diameter 6-1/2 in
Control ARSS-LD
Control Panel P-type
Package Water Saving Package (WSP)
Water Flow Modes High flow: 8 GPM; low flow: 1.6 GPM
Motor Totally enclosed, water-cooled; built-in manual reset thermal overload protection
Housing Material Heat-treated, corrosion-resistant aluminum alloy
Waste Outlet Accepts 2 in or 3 in piping
Support Leg Single support leg
Product Type Unit only

Certifications & Compliance

Certified badge of UL Certified
UL Certified

Frequently Asked Questions

The inlet diameter is 6-1/2 inches.
It includes the disposer assembly, ARSS-LD control, operator sensor, and installation instructions. This product also specifies a fixed nozzle, chrome-plated vacuum breaker, and scrap ring.
The sensor detects the presence or absence of the operator, adjusts water flow, and can shut off the disposer if the operator does not return before the adjustable run timer expires.
For Model 300, the Water Saving Package provides 8 GPM high flow and 1.6 GPM low flow.
The disposer has a 3 HP, 3-phase motor. The exact operating voltage must be specified.
Yes. The ARSS-LD control provides automatic reversing.
The product is certified to UL and CE requirements.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.