Key specifications
- Amps
- 6.6 Amps
- Phase
- 3-Phase
- Dimensions
- 59.1"W × 53.1"D × 87.8"H
- Type
- Blast Chiller
- Style
- Roll-In
- Installation Type
- Floor Model
Spec sheet
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
RCMC40T is an end-load, roll-in blast chiller/shock freezer for commercial foodservice operations.
- Capacity: Holds 20 18 × 26 in sheet pans or 40 12 × 20 × 2.5 in steam table pans.
- Performance: Provides a listed chilling capacity of 463 lb and freezing capacity of 298 lb.
- Controls: Includes a T electronic control board with display.
- Construction: Stainless steel interior and exterior with a die-formed, leak-proof floor.
- Door system: Locking doors include anti-condensation heating elements.
- Probe: Includes a heated core probe.
Remote R404A refrigeration is required and is not included. The unit is field wired for 208/240 Volts, 60 Hz, three-phase electrical service.
Overall Dimensions:
59.1"W x 53.1"D x 87.8"HProduct Weight:
1058.0 lbEnd-Load Roll-In Design
Configured for end loading and roll-in operation.
Pan Capacity
Accommodates 20 18 × 26 in sheet pans or 40 12 × 20 × 2.5 in steam table pans.
Chilling and Freezing Capacity
The specifications list 463 lb chilling capacity and 298 lb freezing capacity.
T Electronic Control
Electronic control board with display; the T control can memorize up to 100 programs.
Heated Core Probe
A heated core probe is included.
Stainless Steel Construction
Stainless steel interior and exterior.
Locking Doors
Doors include locks and anti-condensation heating elements.
Remote Refrigeration
Requires remote R404A refrigeration, which is not included.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.