Key specifications
- Amps
- 6.3 Amps
- Phase
- 1-Phase
- Dimensions
- 87.63"W × 25.63"D × 16.0"H
- Type
- Frost Top
- Installation Type
- Drop-In
- Material
- Stainless Steel
Spec sheet
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Piper Products/Servolift Eastern 6-FTDI is a six-pan drop-in frost top with self-contained refrigeration and a stainless steel top.
- Raised one-piece cold plate with a drip trough on all sides.
- 14-gauge stainless steel top with a feathered down edge on all sides.
- A 3/4 in drain is built into the bottom of the well.
- Remote-mounted control box with an on/off switch and pilot light.
Overall Dimensions:
87.63"W x 25.63"D x 16.0"HProduct Weight:
310.0 lbSix-Pan Capacity
Designed for six pans.
Stainless Steel Top
The top is constructed from 14-gauge stainless steel and has a feathered down edge on all sides.
Raised Cold Plate
A raised one-piece cold plate provides the frost top surface.
Drip Trough
A drip trough runs along all sides of the cold plate.
Well Drain
A 3/4 in drain is built into the bottom of the well.
Self-Contained Refrigeration
The unit uses self-contained refrigeration with a 1/3 HP fan-cooled condensing unit.
Remote Controls
An on/off switch and pilot light are supplied in a remote-mounted control box factory connected by flexible conduit.
Documentation
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.