Key specifications
- Amps
- 6.3 Amps
- Phase
- 1-Phase
- Dimensions
- 87.88"W × 25.75"D × 21.88"H
- Type
- Cold Well
- Style
- Self-Contained Refrigeration
- Installation Type
- Drop-In
Spec sheet
Piper Products/Servolift Eastern 6-CMDI 6-Pan Drop-In Cold Food Unit, Self-Contained Refrigeration, Insulated, 5-Inch-Deep Wells
- Ice-only (non-refrigerated)
- Mechanical refrigeration
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Piper Products/Servolift Eastern 6-CMDI is a six-well, drop-in cold food unit with self-contained mechanical refrigeration. Its 5-inch-deep wells are sized for full-size 12 x 20 inch pans and include a 1-inch drain with shut-off valve.
- 14-gauge stainless steel top with a feathered down edge for countertop installation.
- Insulated wells with fiberglass insulation and a galvanized sheet housing.
- Capillary tube and thermostat control with a 1/3 HP fan-cooled condensing unit.
- 120-volt, single-phase electrical service at 6.3 amps.
As a CM unit, it is designed to be used with ice; mechanical refrigeration is added to retard melting. The cutsheet states that CM units have not been performance tested for storage of potentially hazardous foods.
Overall Dimensions:
87.88"W x 25.75"D x 21.88"HProduct Weight:
215.0 lbSix-Well Configuration
Provides six 5-inch-deep wells for full-size 12 x 20 inch pans.
Mechanical Refrigeration
Uses a 1/3 HP fan-cooled condensing unit with capillary tube and thermostat control.
Stainless Steel Top
The top is fabricated from 14-gauge stainless steel and has a feathered down edge for drop-in installation.
Insulated Wells
The well is insulated with fiberglass around the sides and bottom.
Drain With Shut-Off Valve
Each well assembly includes a 1-inch inside-diameter drain with shut-off valve.
Galvanized Housing
The well is enclosed in a galvanized sheet housing attached to the framework.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.