![Product image of [alt_title]](http://shopusars.com/cdn/shop/t/33/assets/placeholder-image.png?v=182715496336706609461780344796)
$132.55
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to
?
Bevchek Cooler Fluid Temperature Sensor for Draft System Telemetry
10-Foot Cable, 3/8-Inch Wall Pass-Through, 1 Hub Port
Accurately monitor cooler fluid temperature with a dedicated Bevchek sensor designed for straightforward installation inside the cooler.
- Measures cooler fluid temperature as part of the Bevchek telemetry system.
- Mounts inside the cooler with two R11 screw points and a 3/8-inch wall pass-through.
- Includes a standard 10-foot cable and connects to one hub port.
- Designed for placement away from direct fan airflow and cooler doors.
- Operates from -40°C to 125°C with ±0.2°C accuracy.
Wide Temperature Range
Measures cooler fluid temperatures from -40°C to 125°C.
High Accuracy
Specified accuracy of ±0.2°C for dependable monitoring.
Standard Cable Length
Includes a 10-foot cable for typical cooler-to-hub routing.
Extended Cable Support
Maximum supported cable length is 70 feet when extensions are needed.
Single Hub Port Requirement
Each sensor uses one port on the Bevchek hub.
Wall Pass-Through Installation
Designed for a 3/8-inch drilled hole through the cooler wall for the plug end.
Mounting Points
Uses two R11 screw mounting points to secure the sensor inside the cooler.
Type
Cooler Fluid Temperature Sensor
Temperature Range
-40°C to 125°C
Accuracy
±0.2°C
Voltage
5.5 to 20 Volts
Amps
3.5 mA
Cord Length
10 Feet
Maximum Cable Length
70 Feet
Scan Frequency
30 Seconds to 5 Minutes
Hub Ports Required
1
Selling Unit
Each
Units Per Case
1
Shipping Weight
9 lb.
Documents
Frequently Asked Questions
It measures from -40°C to 125°C with ±0.2°C accuracy.
It mounts inside the cooler using two R11 screw points, and the plug end passes through a 3/8-inch hole in the cooler wall.
The standard cable length is 10 feet, and the maximum cable length is 70 feet.
Each cooler fluid temperature sensor requires 1 hub port.
It should be installed away from direct HVAC fan airflow and, if possible, away from the cooler door.
Need Help Deciding?
Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.
Talk to a Specialist
or call
(888) 307-5030