Key specifications
- Dimensions
- 120.0"W × 30.0"D × 44.0"H
- Type
- Soiled Dish Table
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
- Country of Origin
- USA
- Finish
- #4 Satin
Pacific Stainless DTSS120-14-R Soiled Dish Table, Right-to-Left, 120"W x 30"D, 14-Gauge 304 Stainless Steel, 10"H Splash
- 14 Gauge
- 16 Gauge
- Left-to-Right
- Right-to-Left
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Pacific Stainless DTSS120-14-R is a soiled dish table with a straight design and right-to-left configuration.
- 14-gauge 304 stainless steel construction with a #4 satin finish.
- Includes a 2-inch-deep by 10-inch-high backsplash with a 45-degree return.
- Features a 20 x 20 x 7-inch-deep pre-rinse sink.
- Built with a 220-degree sanitary rolled rim, stainless steel H-frame legs, and adjustable feet.
- Made in the USA and NSF certified.
Overall Dimensions:
120.0"W x 30.0"D x 44.0"HProduct Weight:
176.0 lb14-Gauge 304 Stainless Steel Construction
The table uses 14-gauge Type 304 stainless steel with a #4 satin finish.
Right-to-Left Configuration
The right-hand unit is arranged for right-to-left dish flow.
C10 Backsplash
The backsplash is 2 inches deep by 10 inches high and includes a 45-degree return with a 1/2-inch turn-down for wall-clip mounting.
Pre-Rinse Sink
The 20 x 20 x 7-inch-deep sink has welded horizontal and vertical corners with a 5/8-inch radius cove.
Sanitary Rolled Rim
A 220-degree sanitary rolled rim is provided on all free edges.
H-Frame Legs
The 1-5/8-inch stainless steel round-tube H-frame legs include stainless steel adjustable feet.
Faucet and Drain Provisions
The sink includes a basket drain, and faucet holes are punched in the backsplash on 8-inch centers.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.