Key specifications
- BTU
- 3,900 BTU
- Amps
- 10.9 Amps
- Phase
- 1-Phase
- Dimensions
- 51.25"W × 32.31"D × 47.25"H
- Type
- Chocolate Display Case
- Style
- 90° Square Corner
Spec sheet
Oscartek Rosa ROSA CA90SQ Refrigerated Chocolate Display Case, 90° Square Corner, Extra-Clear Tempered Glass, Humidity Control
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Rosa ROSA CA90SQ is a refrigerated chocolate display case with a 90° square corner, humidity control, and self-contained fan-ventilated refrigeration.
- Extra-clear tempered glass on the front, top, and sides with a front air baffle
- Diffused 3000 K LED lighting
- Sliding acrylic back doors
- Stainless steel lower interior foam tub and galvanized chassis structure
- Standard unfinished front with stainless steel skin sides
- Operating temperature of 55°F to 60°F and relative humidity of 55% RH to 65% RH
External dimensions are 51.25 in W × 32.31 in D × 47.25 in H. The case requires 208-220 Volts, 1-phase, 60 Hz power and consumes 1,150 Watts at 10.9 Amps.
Overall Dimensions:
51.25"W x 32.31"D x 47.25"HProduct Weight:
990.0 lbHumidity Control
Supports a relative humidity range of 55% RH to 65% RH.
Tempered Glass Display
Uses extra-clear tempered glass on the front, top, and sides, with a front air baffle.
LED Lighting
Includes diffused LED lighting rated at 3000 K.
Self-Contained Refrigeration
Uses fan-ventilated, self-contained refrigeration with automatic defrost.
Sliding Back Doors
Provides rear access through sliding acrylic back doors.
Interior Construction
Includes a stainless steel lower interior foam tub and galvanized chassis structure.
Standard Exterior Finish
Ships with an unfinished front and stainless steel skin sides.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.