Key specifications
- BTU
- 3,600 BTU
- Amps
- 15.3 Amps
- Phase
- 1-Phase
- Dimensions
- 72.0"W × 96.0"D × 103.0"H
- Type
- Walk-In Freezer
- Style
- Outdoor
Spec sheet
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The FTOF8768-CX-M is an outdoor Fast-Trak walk-in freezer with a 6' x 8' nominal size, 8'7" nominal height, floor, and CPF100PC-E-0 self-contained refrigeration.
It uses 26 gauge embossed coated steel on the interior and exterior surfaces, with a smooth aluminum interior floor.
- 115 V, 60 Hz, single-phase electrical connection
- Self-closing door with locking deadbolt handle
- Full 4 in. foamed-in-place polyurethane insulated panels
- R290 refrigerant and LogiTemp electronic controller
Overall Dimensions:
72.0"W x 96.0"D x 103.0"HProduct Weight:
1101.0 lbSelf-Contained Refrigeration
Specified with the CPF100PC-E-0 outdoor self-contained refrigeration system using R290 refrigerant.
Outdoor Freezer Configuration
Outdoor walk-in freezer configuration with a -10°F temperature specification.
Coated Steel Construction
Interior and exterior surfaces use 26 gauge embossed coated steel.
Smooth Aluminum Interior Floor
The with-floor model includes a smooth aluminum interior floor.
Insulated Panels
Full 4 in. panels are foamed in place with EPA-compliant polyurethane insulation.
Self-Closing Door
The door includes a locking deadbolt handle with an inside safety release.
Electrical Connection
The system uses 115 V, 60 Hz, single-phase power with a NEMA 5-20P plug and 9 ft. cord.
Electronic Control
The Capsule Pak ECO refrigeration system uses a LogiTemp electronic controller.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.