Key specifications
- BTU
- 2,900 BTU/h
- Amps
- 11.4 Amps
- Phase
- 1-Phase
- Dimensions
- 72.0"W × 84.0"D × 91.0"H
- Type
- Walk-In Freezer
- Style
- Outdoor
Spec sheet
Norlake Fast-Trak FTOF7767-CX-M Outdoor Walk-In Freezer, 6' x 7' x 7'7", Self-Contained Refrigeration, Coated Steel Finish
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Norlake Fast-Trak FTOF7767-CX-M is an outdoor walk-in freezer with a nominal 6' x 7' x 7'7" size, a floor, and self-contained Capsule Pak ECO refrigeration.
It features 26 gauge embossed coated steel interior and exterior panels, a smooth aluminum interior floor, and full 4" foamed-in-place polyurethane-insulated panels.
- Self-closing door with a deadbolt locking handle and inside safety release.
- Digital thermometer, light switch, and above-door LED light fixture.
- Designed for a -10°F freezer temperature.
- 115-volt, 60 Hz, single-phase electrical service.
Overall Dimensions:
72.0"W x 84.0"D x 91.0"HProduct Weight:
924.0 lbSelf-Contained Refrigeration
Includes the outdoor Capsule Pak ECO refrigeration system CPF075PC-E-0.
Coated Steel Panels
Interior and exterior panels use 26 gauge embossed coated steel.
Insulated Panel Construction
Full 4-inch panels use foamed-in-place polyurethane insulation.
Aluminum Interior Floor
The with-floor design includes a smooth aluminum interior floor.
Self-Closing Door
The door includes a deadbolt locking handle with an inside safety release.
Temperature Control
The freezer system uses a LogiTemp electronic controller and is designed for -10°F operation.
Lighting and Thermometer
The door section includes a digital thermometer, light switch, and above-door LED light fixture.
Field-Configurable Door Placement
Fast-Trak walk-ins are supplied with filler panels that allow door placement along a wall during installation.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.