Key specifications
- BTU
- 4,400 BTU
- Amps
- 7.4 Amps
- Phase
- 1-Phase
- Dimensions
- 96.0"W × 132.0"D × 79.0"H
- Type
- Walk-In Freezer
- Installation Type
- Floor Model
Spec sheet
Norlake Fast-Trak FTOF67811-CX-M Outdoor Walk-In Freezer, 8' x 11' x 6'7", Self-Contained Refrigeration, Coated Steel
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Norlake Fast-Trak FTOF67811-CX-M is an outdoor walk-in freezer with nominal dimensions of 8' x 11' x 6'7" and a self-contained CPF150PC-E-4 refrigeration system.
- 26 gauge embossed coated steel interior and exterior finish
- Smooth aluminum interior floor
- Self-closing door with locking deadbolt handle
- Four-inch foamed-in-place polyurethane-insulated panels
- 230 Volt, 60 Hz, 1-phase electrical configuration
- R290 refrigerant and LogiTemp electronic controls
The walk-in is designed for a -10°F freezer temperature and includes an LED light and digital thermometer/light switch at the door.
Overall Dimensions:
96.0"W x 132.0"D x 79.0"HProduct Weight:
1412.0 lbSelf-Contained Refrigeration
Uses the CPF150PC-E-4 Capsule Pak ECO outdoor refrigeration system.
Outdoor Construction
The interior and exterior use 26 gauge embossed coated steel.
Smooth Aluminum Interior Floor
The walk-in includes a smooth aluminum interior floor.
Freezer Temperature
The system is specified for a -10°F freezer temperature.
Insulated Panels
Full 4-inch panels use foamed-in-place polyurethane insulation.
Self-Closing Door
The door is self-closing and includes a locking deadbolt handle with an inside safety release.
Field-Configurable Door Placement
The Fast-Trak walk-in supports door placement along the available walls using supplied filler panels.
Door Lighting and Temperature Display
The door section includes an LED light and digital thermometer/light switch.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.