Key specifications
- BTU
- 6,350 BTUH
- Amps
- 10.7 Amps
- Phase
- 1-Phase
- Dimensions
- 108.0"W × 120.0"D × 103.0"H
- Type
- Walk-In Freezer
- Installation Type
- Floor Model
Spec sheet
Norlake Fast-Trak FTF87910-CX-M Indoor Walk-In Freezer, 9' x 10' x 8'7", Self-Contained Refrigeration, Coated Steel Finish
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Norlake Fast-Trak FTF87910-CX-M is an indoor walk-in freezer with a 9 ft x 10 ft nominal size, an 8 ft 7 in height, and self-contained refrigeration. Its 4-inch-thick panels use foamed-in-place polyurethane insulation with coated steel interior and exterior surfaces and a smooth aluminum interior floor.
- Self-closing door with a deadbolt locking handle, inside safety release, magnetic gasket, and digital thermometer/light switch.
- Specified with the CPF175PC-S-4 self-contained refrigeration system and 230 Volt, 60 Hz, single-phase electrical service.
- Includes a 15-year panel warranty and an 18-month parts and labor warranty under the stated warranty terms.
Overall Dimensions:
108.0"W x 120.0"D x 103.0"HProduct Weight:
1620.0 lbSelf-Contained Refrigeration
Specified with the CPF175PC-S-4 self-contained refrigeration system.
Insulated Panels
4-inch-thick panels are foamed in place with EPA-compliant polyurethane insulation.
Coated Steel Finish
Interior and exterior surfaces use 26-gauge embossed coated steel.
Smooth Aluminum Interior Floor
The with-floor model includes a smooth aluminum interior floor.
Self-Closing Door
The door is self-closing and includes a magnetic gasket.
Deadbolt Locking Handle
The locking handle includes an independent key or padlock feature and an inside safety release.
Digital Thermometer and Light Switch
A combination digital thermometer and light switch is included.
Field-Configurable Door Placement
Fast-Trak walk-ins are shipped with filler panels that allow door placement along the door wall during installation.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.