Key specifications
- BTU
- 4,400 BTU
- Amps
- 7.4 Amps
- Phase
- 1-Phase
- Dimensions
- 96.0"W × 108.0"D × 91.0"H
- Type
- Walk-In Freezer
- Installation Type
- Floor Model
Spec sheet
Norlake Fast-Trak FTF7789-CX-M Indoor Walk-In Freezer, 8' x 9' x 7'7", Self-Contained Refrigeration, Coated Steel, Floor Included
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Fast-Trak FTF7789-CX-M is an indoor walk-in freezer with nominal 8' x 9' x 7'7" dimensions and self-contained CPF150PC-S-4 refrigeration.
Its panels have a 26 gauge embossed coated steel interior and exterior finish, with a smooth aluminum interior floor. The freezer has a self-closing door with a locking deadbolt handle and a 230 V, 60 Hz, single-phase electrical configuration.
Overall Dimensions:
96.0"W x 108.0"D x 91.0"HProduct Weight:
1288.0 lbSelf-Contained Refrigeration
Uses the specified CPF150PC-S-4 self-contained refrigeration system.
Coated Steel Panels
The interior and exterior panels use 26 gauge embossed coated steel.
Included Floor
The model is supplied with a smooth aluminum interior floor.
Self-Closing Door
The door is specified as self-closing.
Locking Deadbolt Handle
The door includes a locking deadbolt handle.
Foamed-In-Place Insulation
The walk-in panels are 4 inches thick and foamed-in-place with polyurethane insulation.
Indoor Installation
The exact model is specified as an indoor walk-in freezer.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.