Key specifications
- Application
- Indoor freezer walk-in
- Nominal size
- 6' W x 11' D x 7' 7" H
- Refrigeration system
- Capsule Pak ECO CPF150PC-S-4, self-contained
- Refrigerant
- R290
- Freezer design temperature
- -10°F
- Electrical
- 230 V / 60 Hz / 1 phase
Spec sheet
Norlake Fast-Trak FTF77611-CX-M Indoor Freezer Walk-In, 6' x 11' x 7'7", Self-Contained Refrigeration, Coated Steel Finish
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
Fast-Trak indoor freezer walk-in with nominal dimensions of 6' x 11' x 7'7" and self-contained Capsule Pak ECO CPF150PC-S-4 refrigeration.
- 4-inch foamed-in-place polyurethane insulated panels
- 26 gauge embossed coated steel interior and exterior finish
- Smooth aluminum interior floor
- Self-closing door with deadbolt locking handle
- 230 V / 60 Hz / 1-phase electrical specification
Overall Dimensions:
72.0"W x 132.0"D x 91.0"HProduct Weight:
1246.0 lbSelf-contained refrigeration
Uses the Capsule Pak ECO CPF150PC-S-4 self-contained indoor refrigeration system.
Freezer temperature
The Fast-Trak freezer configuration is specified for a -10°F design temperature.
Insulated panels
Panels are 4 inches thick and foamed in place with polyurethane insulation.
Coated steel finish
The interior and exterior use 26 gauge embossed coated steel.
Smooth aluminum floor
The with-floor walk-in includes a smooth aluminum interior floor.
Self-closing door
The door is self-closing and includes a deadbolt locking handle.
Indoor installation
This model is specified for indoor installation.
Field-configurable door placement
Fast-Trak walk-ins use filler panels to support field-configurable door placement along a wall.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.