Key specifications
- BTU
- 2,900 BTUH
- Amps
- 11.4 Amps
- Phase
- 1-Phase
- Dimensions
- 72.0"W × 84.0"D × 79.0"H
- Type
- Walk-In Freezer
- Installation Type
- Floor Model
Spec sheet
Norlake Fast-Trak FTF6767-CX-M Indoor Freezer Walk-In, 6' x 7' x 6'7", Self-Contained Refrigeration, Aluminum Floor
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Norlake Fast-Trak FTF6767-CX-M is an indoor walk-in freezer measuring 6' wide by 7' deep by 6'7" high. It is specified with self-contained CPF075PC-S-0 refrigeration, a smooth aluminum interior floor, and 26 gauge embossed coated steel interior and exterior finish.
- 115 V, 60 Hz, 1-phase electrical specification
- Self-closing door with locking deadbolt handle
- Four-inch foamed-in-place polyurethane-insulated panels
- Digital thermometer, light switch, and LED light fixture
Overall Dimensions:
72.0"W x 84.0"D x 79.0"HProduct Weight:
821.0 lbSelf-Contained Refrigeration
Specified with the CPF075PC-S-0 self-contained refrigeration system.
Smooth Aluminum Interior Floor
The walk-in includes a smooth aluminum interior floor.
Coated Steel Panels
Interior and exterior panels use 26 gauge embossed coated steel.
Four-Inch Insulated Panels
Panels are 4 in thick and foamed in place with EPA-compliant polyurethane insulation.
Self-Closing Door
The door is self-closing and includes a magnetic gasket and door heater wire.
Locking Deadbolt Handle
The deadbolt handle includes an independent key or padlock feature and an inside safety release.
Field-Configurable Door Placement
Two 2-foot filler panels are shipped with each door to support door placement along the door wall.
LED Lighting and Digital Thermometer
The door section includes an above-door LED light fixture, light switch, and digital thermometer.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.