Key specifications
- Type
- Walk-In Freezer
- Installation Type
- Floor Model
- Material
- Coated Steel
- Finish
- Coated Steel
- Interior Finish
- Embossed Coated Steel
- Floor Material
- Aluminum
Spec sheet
Norlake Fast-Trak FTF671018-X Indoor Walk-In Freezer, 10' x 18' x 6'7", Remote Refrigeration, Aluminum Floor
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Norlake Fast-Trak FTF671018-X is an indoor walk-in freezer measuring 10' x 18' x 6'7". It is specified with remote refrigeration and a smooth aluminum interior floor.
The walk-in uses 4-inch foamed-in-place polyurethane-insulated panels with 26 gauge embossed coated steel interior and exterior surfaces, plus a self-closing door with a locking deadbolt handle.
- Remote refrigeration system designation: MSLD020AB/E1LD0076B-TE2
- Digital thermometer and light switch with an above-door LED light
- Field-configurable door placement with two 2-foot filler panels per door
Overall Dimensions:
120.0"W x 216.0"D x 79.0"HProduct Weight:
2346.0 lbRemote Refrigeration
Specified with remote refrigeration system MSLD020AB/E1LD0076B-TE2.
Aluminum Interior Floor
The with-floor model has a smooth aluminum interior floor.
Insulated Panels
Full 4-inch panels are foamed in place with polyurethane insulation.
Coated Steel Finish
Interior and exterior surfaces use 26 gauge embossed coated steel, except for the interior floor.
Self-Closing Door
The door is self-closing and includes a magnetic gasket and perimeter heater wire.
Deadbolt Locking Handle
The locking deadbolt handle includes an independent key or padlock feature and an inside safety release.
Door Lighting and Controls
The door section includes a digital thermometer, light switch and above-door LED light.
Field-Configurable Door Placement
Two 2-foot filler panels are shipped per door to support field-configurable placement along a wall.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.