Key specifications
- BTU
- 100,000 BTU
- Amps
- 3.4 Amps
- Phase
- 1-Phase
- Dimensions
- 36.0"W × 37.25"D × 36.0"H
- Type
- Range
- Style
- Convection Oven Base
Montague Legend V136-9E Commercial Gas Range, 36 in., 3 Hot Tops, Convection Oven Base, Stainless Steel Front
- Convection oven base
- Standard oven base
- Open cabinet base
- Even Heat
- Gradient Heat
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Montague Legend V136-9E is a 36-inch gas range with three 12-inch Even-Heat hot tops and a convection oven base.
- Three solid cast iron hot tops with individual burner controls
- Convection oven with a 40,000 BTU burner, blower, and five-position rack supports
- Three wire pan racks standard
- Stainless steel front and exterior bottom with a 4-inch stainless steel rear flue riser
- Six-inch adjustable stainless steel legs
- Standard 120-volt electrical connection with a 6-foot NEMA 5-15P cord
Overall Dimensions:
36.0"W x 37.25"D x 36.0"HProduct Weight:
745.0 lbEven-Heat Hot Tops
Three 12-inch solid cast iron hot tops with precision-ground plates, 20,000 BTU burners, and individual burner controls.
Convection Oven
Indirect-fired convection oven with a blower, 40,000 BTU cast iron burner, five-position adjustable nickel-plated rack supports, and a thermostat ranging from low to 500°F.
Oven Racks
Three wire pan racks are standard.
Stainless Steel Construction
Stainless steel front and exterior bottom, a 4-inch stainless steel rear flue riser, and six-inch adjustable stainless steel legs.
Counterweighted Door
Heavy-duty convection oven door with a counterweighted design.
Electrical Connection
Standard 120-volt, 1-phase, 60 Hz connection with 3.4 amps and a 6-foot NEMA 5-15P cord.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.