Moffat

Moffat VH33 Ventless Condensing Hood for Turbofan E33D/E33T Convection Ovens

SKU: VH33
$6,943.00
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Moffat VH33 Ventless Condensing Hood for Turbofan E33D/E33T Convection Ovens

3-Stage Filtration, Self-Contained Condensate Collection, 110-120V

This ventless hood helps you install compatible Turbofan ovens without a traditional canopy or ducted hood, while simplifying grease capture and condensate management.

  • Ventless design removes the need for a canopy or ducted oven hood.
  • 3-stage filtration captures grease, particles, and odors for cleaner exhaust management.
  • Self-contained condensate collection does not require a waste drain connection.
  • Automatic 2-speed extraction fan adjusts for idle cooking, bake cycles, and door openings.
  • Oven interlock helps prevent operation if the hood is not running.
  • 110-120V plug-in unit with a NEMA 5-15P cordset for straightforward electrical hookup.

Ventless Condensing Design

Designed to vent compatible ovens without a separate canopy or ducted hood, reducing installation complexity.

3-Stage Filtration

Includes a removable grease baffle filter, removable mesh particle filter, and replaceable charcoal odor filter.

Condensing Heat Exchanger

Condenses oven vent discharge and helps reduce heat emissions.

Self-Contained Condensate Collection

Collects condensate in the pan below the oven, so a waste drain connection is not required.

Remote Drain Option

Condensate can be routed to a permanent waste drain if desired.

Oven Interlocked Operation

The oven will not operate unless the hood is turned on, and the hood includes an illuminated power switch.

Automatic 2-Speed Extraction Fan

Runs at low speed during cooking, switches to high speed before cycle completion, and increases extraction when the oven door opens.

304 Stainless Steel Construction

Built with welded stainless steel casing and service panels at the top and rear for durability and service access.

Included Installation Kit

Supplied with the VHIK33 installation kit, including the interlock harness, oven feet, condensate collection pan and housing, rear shroud, and securing plate for stand-mounted installation.

Electrical Setup

Fitted with a 6-foot NEMA 5-15P cordset for 110-120V, 60 Hz, 1-phase operation.

Type Ventless Condensing Hood
Style Ventless
Material 304 Stainless Steel
Voltage 110-120 Volts
Amps 1.0 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 6 Feet
Water Connection Not Required
Drain Connection Not Required
Shipping Width 26 1/2 Inches
Shipping Depth 39 1/2 Inches
Shipping Height 21 1/2 Inches
Shipping Weight 110 lbs.
Selling Unit Each
Units Per Case 1
Country of Origin USA

Frequently Asked Questions

It is designed for Turbofan E33D and E33T convection ovens, and the installation kit references E33D5 and E33T5 models.
No. The unit uses self-contained condensate collection, so a waste drain connection is not required, though a remote drain option is available.
It uses a 3-stage system: a grease baffle filter, a mesh particle filter, and a replaceable charcoal odor filter.
The hood operates on 110-120V, 60 Hz, single-phase power and comes with a NEMA 5-15P cordset.
Yes. The VHIK33 installation kit is supplied standard with the hood.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.