Key specifications
- Amps
- 5.1 Amps
- Phase
- 1-Phase
- Dimensions
- 60.25"W × 34.0"D × 46.2"H
- Type
- Sandwich Prep Table
- Style
- Big Top
- Installation Type
- Floor Model
Spec sheet
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Migali C-SP60-24BT-HC is a two-section refrigerated sandwich prep table with an 18.2 cu. ft. capacity and a top rail accommodating 24 1/6 size pans. It features rear-mounted self-contained refrigeration, forced air cooling, a digital controller and display, and a +33° to +41° F temperature range.
- Stainless steel exterior and interior
- Two solid hinged doors and two shelves
- 9-1/4 in. deep cutting board
- Adapter bars included; 1/6 size pans are not included
- Four 6 in. casters, including two locking casters
- R290 hydrocarbon refrigerant
- 115V, 60 Hz, single-phase operation with a NEMA 5-15P plug
Overall Dimensions:
60.25"W x 34.0"D x 46.2"HProduct Weight:
340.0 lb24-Pan Top Rail
The top rail accommodates 24 1/6 size pans; pans are not included.
Two-Section Configuration
The refrigerated cabinet is configured with two sections, two solid hinged doors, and two shelves.
Rear-Mounted Self-Contained Refrigeration
The self-contained refrigeration system is mounted at the rear.
Forced Air Cooling
Forced air cooling supports the refrigerated cabinet and pan rail.
Digital Temperature Control
A digital controller and display supports the +33° to +41° F temperature range.
Stainless Steel Construction
The exterior and interior are stainless steel.
Included Prep Accessories
The unit includes a 9-1/4 in. deep cutting board and adapter bars.
Caster Base
Four 6 in. casters are included, with two locking casters.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.