Key specifications
- Amps
- 3.1 Amps
- Phase
- 1-Phase
- Dimensions
- 76.0"W × 32.0"D × 26.2"H
- Type
- Refrigerated Chef Base
- Style
- Two-Section
- Installation Type
- Floor Model
Spec sheet
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Migali Competitor Series® C-CB72-76-HC refrigerated chef base provides 15.0 cu. ft. of refrigerated storage in a 76-inch-wide, two-section cabinet with four drawers.
- Stainless steel top, exterior, and interior.
- Accommodates 24 1/6-size pans that are 4 inches deep; pans are not included.
- Digital temperature controller and display with a +33°F to +41°F temperature range.
- Side-mounted, self-contained refrigeration with forced-air cooling and R290 hydrocarbon refrigerant.
- Four 6-inch casters are pre-installed, including two locking casters.
- Heavy-duty Compex® self-closing drawer slides.
- Requires 115V, 60 Hz, single-phase power and uses a NEMA 5-15P plug.
Overall Dimensions:
76.0"W x 32.0"D x 26.2"HProduct Weight:
369.0 lbRefrigerated Storage
Two-section refrigerated cabinet with 15.0 cu. ft. of capacity and four drawers.
Pan Accommodation
Accommodates 24 1/6-size pans that are 4 inches deep only; pans are not included.
Temperature Control
Digital temperature controller and display maintain a stated range of +33°F to +41°F.
Refrigeration System
Side-mounted, self-contained refrigeration uses forced-air cooling and R290 hydrocarbon refrigerant.
Stainless Steel Construction
The top, exterior, and interior are stainless steel.
Drawer Slides
Compex® heavy-duty self-closing drawer slides.
Mobility
Four pre-installed 6-inch casters are included, with two locking casters.
Electrical Connection
115V, 60 Hz, single-phase operation at 3.1 amps with a NEMA 5-15P plug.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.