Key specifications
- BTU
- 160,000 BTU
- Gas Type
- Natural Gas
- Amps
- 15 Amps
- Phase
- 1-Phase
- Dimensions
- 106.1"W × 59.36"D × 47.41"H
- Type
- Conveyor Oven
Spec sheet
Middleby Marshall X70G-3 Triple-Deck Natural Gas Conveyor Pizza Oven, 70-Inch Chamber, 32-Inch Belt per Deck
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Middleby Marshall X70G-3 is a triple-deck natural gas conveyor oven with a 70-inch-long cooking chamber and a 32-inch-wide standard single belt on each deck.
It features an electronic display controller, front-loading window, and included legs and casters. The oven has a 160,000 BTU natural gas input and operates on 208/240-volt, single-phase electrical service.
- Three conveyor decks
- One standard single belt per deck
- 50/60 Hz electrical operation
Overall Dimensions:
106.1"W x 59.36"D x 47.41"HProduct Weight:
1933.0 lbTriple-Deck Configuration
Provides three conveyor oven decks with one conveyor per deck.
Energy Management Conveyor Oven
Uses an energy management conveyor oven design for natural gas operation.
70-Inch Cooking Chamber
The cooking chamber is 70 inches long.
32-Inch Belt Per Deck
Each deck has a 32-inch-wide standard single belt.
Electronic Display Controller
Includes an electronic display controller.
Front-Loading Window
Includes a front-loading window.
Included Legs and Casters
Legs and casters are included.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.