Key specifications
- BTU
- 140,000 BTU
- Gas Type
- Natural Gas or Propane
- Amps
- 15 Amps
- Phase
- 1-Phase
- Dimensions
- 90.78"W × 59.2"D × 43.22"H
- Type
- Conveyor Oven
Spec sheet
Middleby Marshall X55G-CO Gas Conveyor Oven, Single Deck Floor Model, 55-Inch Chamber, Reversible Conveyor
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
Middleby Marshall X55G-CO is a gas-fired, single-deck conveyor oven with a 55-inch cooking chamber and a 32-inch standard single belt.
It features a 300°F–600°F operating temperature range, controllable bake and conveyor speed, a 1–19 minute time range, reversible conveyor direction, and a front-loading window.
The oven has stainless steel front, sides, top, and interior. It is specified at 140,000 BTU with 208/240-volt, 50/60 Hz, single-phase electrical service and 15 amps.
Overall Dimensions:
90.78"W x 59.2"D x 43.22"HProduct Weight:
1290.0 lbReversible Conveyor
The conveyor direction is reversible for product delivery.
Controllable Bake and Conveyor Speed
Bake and conveyor speed controls support a 1–19 minute time range.
55-Inch Cooking Chamber
The cooking chamber is 55 inches long.
Front-Loading Window
A front-loading window is included.
Stainless Steel Surfaces
The front, sides, top, and interior are stainless steel.
Energy Management System
The product is specified as an energy management conveyor oven.
Jet Sweep Impingement
The cutsheet identifies a Jet Sweep impingement process.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.