Key specifications
- BTU
- 40,000 BTU
- Gas Type
- Natural Gas / Propane
- Amps
- 1.5 Amps
- Phase
- 1-Phase
- Dimensions
- 45.0"W × 40.0"D × 28.0"H
- Type
- Conveyor Oven
Middleby Marshall PS520G-CO Countertop Gas Conveyor Oven Cavity Only, 18-Inch Belt, Digital Controls, Reversible Conveyor
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
PS520G-CO is a cavity-only countertop gas conveyor oven intended to replace an existing PS520 in a stack.
It features a 20-inch cooking chamber, an 18-inch-wide standard belt, digital temperature and speed controls, and a reversible conveyor with left-to-right feed.
- 30-second to 12 1/2-minute conveyor time range
- 200°F to 600°F operating temperature range
- Stainless steel front, sides, top, and interior
- 40,000 BTU rated heat input
Overall Dimensions:
45.0"W x 40.0"D x 28.0"HProduct Weight:
410.0 lbCavity-Only Design
Intended to replace an existing PS520 in a stack.
18-Inch Conveyor Belt
Uses an 18-inch-wide standard belt.
Digital Controls
Separate digital temperature and speed controllers provide control of oven temperature and conveyor speed.
Adjustable Conveyor Time
The conveyor time range is 30 seconds to 12 1/2 minutes.
Reversible Conveyor
The conveyor direction is reversible, with left-to-right feed specified.
Stainless Steel Interior And Exterior
The front, sides, top, and interior are stainless steel.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.