Micro Matic USA MMPP4302-WC Pro-Line Back Bar Coolers
Micro Matic USA MMPP4302-WC Pro-Line Back Bar Coolers is backordered and will ship as soon as it is back in stock.
Documents
Related Searches
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.
Micro Matic USA MMPP4302-WC Pro-Line Back Bar Coolers
Description
Pro-Line™ Water-Cooled Power Pack – 3,600 BTU
Model MMPP4302-WC | Micro Matic USAKeep every pour brewery-fresh—even in tight or high-heat back-of-house spaces. The Pro-Line™ water-cooled power pack delivers a rock-solid 3,600 BTU of cooling while a built-in rotary-vane pump recirculates glycol to your remote draft tower. Engineered by beer-industry experts, it’s the hassle-free heart of a professional long-draw draft system.
Why choose this power pack?
- Water-cooled condenser—ideal where air circulation is limited or ambient temperatures run high.
- Single 80 gph rotary-vane pump with 1/3 HP motor keeps glycol moving to multiple towers.
- Digital thermostat with LED read-out for precise bath temperature control.
- 11.5 gal (43.5 L) insulated glycol reservoir minimizes temperature swing & condensation.
- Exterior sight glass lets staff confirm glycol level at a glance.
- Expanded-urethane foam insulation and anti-vibration pads reduce energy use and noise.
- Rugged stainless-steel cabinet built for busy commercial environments.
- .3 GPM average water usage (only when condenser demands)—saves utilities.
- cETLus listed for safety & sanitation; one-year limited parts & labor warranty.
Technical specifications
| Cooling capacity | 3,600 BTU/hr (1/2 HP compressor, R-134a) |
|---|---|
| Reservoir volume | 11.5 gal (43.5 L) glycol bath |
| Pump | Rotary-vane, 80 gph flow, 1/3 HP motor |
| Cooling method | Water-cooled condenser, 3/8" FNPT inlet & outlet |
| Inlet water parameters | 45 – 80 °F, 40 – 120 psi, min. 3/8" supply line |
| Electrical | 115 V / 60 Hz / 1-phase, 14.9 A, NEMA 5-20P |
| Dimensions (W × D × H) | 30" × 18" × 28.75" (762 × 457 × 730 mm) |
| Glycol line connection | ½" OD push-in fitting (⅜" barb included) |
| Cabinet construction | Stainless steel, expanded-urethane insulated |
| Certifications | cETLus, NSF-compliant materials |
| Shipping weight | 175 lb (80 kg) |
| Warranty | 1-year limited parts & labor |
Installation & operating notes
- Use a 35 %–40 % propylene-glycol / de-ionized water blend (not included) for optimal heat transfer and freeze protection.
- Provide a dedicated 20-amp, 115 V receptacle within reach of the 6 ft factory cord.
- Plumb water in/out with 3/8" copper or PEX, observing local codes. A back-flow preventer is recommended.
- Maintain glycol level between the MIN/MAX marks on the sight glass for best performance.
- Clean condenser coil and check pump strainer quarterly; full preventative-maintenance schedule in owner’s manual.
Need help sizing a power pack for your draft system? Contact Micro Matic Technical Support at 1-866-327-4159.
