Loading...
Micro Matic USA MMPP4302-PKG-R Pro-Line Back Bar Coolers
$4,809.02
Unit price
/
Unavailable
Expected delivery date of , to your door
if ordered within hours and minutes
Not Shipping to ?
More Delivery Options
Micro Matic USA MMPP4302-PKG-R Pro-Line Back Bar Coolers is backordered and will ship as soon as it is back in stock.
Documents
Related Searches
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.
Micro Matic USA MMPP4302-PKG-R Pro-Line Back Bar Coolers
$4,809.02
Unit price
/
Unavailable
Description
Pro-Line™ Remote Glycol Power Pack – 1/2 HP, Dual Pump
Micro Matic Model MMPP4302-PKG-R • 3,600 BTU/hPurpose-built for long-draw draft beer systems, the Pro-Line™ power pack maintains an icy 29 °F glycol bath while relocating heat and compressor noise up to 50 ft away from your walk-in cooler. The result—consistent, brewery-fresh pours from the first pint to the last.
Key Advantages
- Remote air-cooled condenser removes heat & noise from the keg room (mount up to 50 ft away*)
- Heavy-duty 1/2 HP compressor delivers 3,600 BTU/h of cooling power
- Dual rotary-vane circulation pumps support two trunk lines or provide built-in redundancy
- 11.5 gal (43.5 L) insulated glycol reservoir with exterior sight glass & digital thermostat
- Expanded-urethane foam cabinet prevents energy loss and condensation
- Anti-vibration pads, fan-cycling switch & crank-case heater for quiet, reliable operation
- Pump-down refrigeration system protects the compressor during off cycles
- ETL-listed and backed by Micro Matic’s 1-year limited warranty
Specifications
| Part Number | MMPP4302-PKG-R |
|---|---|
| Cooling Capacity | 3,600 BTU/h |
| Compressor | 1/2 HP, air-cooled |
| Pumps | 2 × Rotary Vane (approx. 100 GPH each) |
| Glycol Bath Volume | 11.5 gal / 43.5 L |
| Refrigerant | R-134a |
| Electrical – Bath Unit | 115 V, 9.8 A, 60 Hz, NEMA 5-15P, 8 ft cord |
| Electrical – Condenser | 115 V, 11.2 A, hard-wired (no plug) |
| Fluid Connections | ½" O.D. push-in (⅜" barbs included) |
| Bath Unit (L × W × H) | 36.75" × 26.75" × 17.75" |
| Condenser (L × W × H) | 23.75" × 17.25" × 18.5" |
| Shipping Weight | 175 lb / 80 kg (combined) |
Installation Notice
• Must be installed by a qualified refrigeration technician.
• Copper line set, drier, sight glass & refrigerant charge supplied by installer.
• Condensing unit requires hard-wiring to a dedicated 115 V circuit.
• Maximum distance between bath assembly and condenser: 50 ft.
• Follow all local electrical & plumbing codes.
• Must be installed by a qualified refrigeration technician.
• Copper line set, drier, sight glass & refrigerant charge supplied by installer.
• Condensing unit requires hard-wiring to a dedicated 115 V circuit.
• Maximum distance between bath assembly and condenser: 50 ft.
• Follow all local electrical & plumbing codes.
Perfect For
- Bars & restaurants running towers up to 500 ft from the cooler
- Stadium suites, hotels & large event venues
- Brewpubs seeking redundant pump capacity
- Any application where cooler heat and noise need to be relocated
*Distance measured from bath outlet to condenser suction inlet.
Features & Specs
Features & Specs
Manufacturer
Micro Matic USA
Brand_name
Pro-Line
Pumps
2
Cooling
glycol cooled
HP
1/2
Specifications
Pro-Line™ Draft Beer System Glycol Power Pack, remote, 1/2 HP compressor, dual pump & motor, remote compressor to bath must be no further than 50 feet, freon tube and connection cost by refrigeration contractor, condensing unit must be hardwired for electric
