Key specifications
- Amps
- 2.0 Amps
- Phase
- 1-Phase
- Dimensions
- 95.19"W × 26.31"D × 33.31"H
- Type
- Bottle Cooler
- Style
- Flat Top Deep Well
- Installation Type
- Floor Model
Micro Matic Pro-Line MDW95 Flat Top Deep Well Bottle Cooler, 95.2-Inch, 69 Cu. Ft., 3 Sliding Locking Doors
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Micro Matic Pro-Line MDW95 is a 95.19-inch-wide deep well bottle cooler with 69.0 cu. ft. capacity, self-contained refrigeration, and a flat top with a raised glass rail.
- Three sliding doors with locks provide access to the refrigerated storage area.
- The stainless steel top, black vinyl over steel exterior, and galvanized steel interior are built for commercial bottle and pre-packaged product storage.
- Seven epoxy-coated dividers, incandescent interior lighting, and a front cap opener/catcher are included.
- An automatic condensate evaporator eliminates the need for a drain connection.
- The unit uses R290 Hydrocarbon refrigerant and operates at 115 Volts, 60 Hz, single-phase, and 2.0 Amps.
Overall Dimensions:
95.19"W x 26.31"D x 33.31"HProduct Weight:
508.0 lbDeep Well Flat Top Design
The unit has a flat top and deep well design for bottle storage.
Sliding Locking Doors
Three sliding doors with locks are included.
Raised Glass Rail
The stainless steel top includes a raised glass rail.
Interior Organization
Seven epoxy-coated dividers are included.
Interior Lighting
Incandescent interior lighting is included.
Automatic Condensate Evaporator
The automatic condensate evaporator requires no drain connection.
Cap Opener/Catcher
A cap opener and catcher are included on the front.
Ventilation
The cabinet uses front breathing and side ventilation.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.