Key specifications
- Amps
- 2.0 Amps
- Phase
- 1-Phase
- Dimensions
- 50.38"W × 26.38"D × 33.31"H
- Type
- Bottle Cooler
- Style
- Deep Well Flat Top
- Installation Type
- Floor Model
Spec sheet
Micro Matic Pro-Line MDW50S 50-Inch Deep Well Flat Top Bottle Cooler, Stainless Steel, 37 cu. ft., 2 Sliding Doors
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Micro Matic Pro-Line MDW50S is a 50-3/8-inch deep well bottle cooler with 37.0 cu. ft. capacity and self-contained refrigeration.
- Stainless steel top and exterior with a galvanized, NSF-approved interior.
- Two sliding doors with locks and three epoxy-coated dividers.
- Raised glass rail, incandescent interior lighting, and a front cap opener/catcher.
- Automatic condensate evaporation requires no drain connection.
- Uses R290 hydrocarbon refrigerant and operates at 115 Volts.
Overall Dimensions:
50.38"W x 26.38"D x 33.31"HProduct Weight:
260.0 lbDeep Well Design
Horizontal deep well bottle cooler format with a flat top and raised glass rail.
Stainless Steel Exterior
Stainless steel top and exterior construction.
Sliding Doors
Two sliding doors are fitted with locks.
Interior Organization
Includes three epoxy-coated dividers.
Interior Lighting
Includes incandescent interior lighting.
Cap Opener/Catcher
Includes a cap opener and catcher on the front.
Self-Contained Refrigeration
Self-contained refrigeration uses R290 hydrocarbon refrigerant.
Automatic Condensate Evaporation
Automatic condensate evaporator eliminates the need for a drain connection.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.