Key specifications
- BTU
- 2,200 BTU/Hour
- Amps
- 3.5 Amps
- Phase
- 1-Phase
- Dimensions
- 26.3125"W × 15.6875"D × 14.5625"H
- Type
- Flash Chiller
- Style
- Air-Cooled
Spec sheet
Micro Matic FC-8000 Air-Cooled Flash Chiller for Beer or Wine, 2-Product, 15-Ft Cooling Distance, Digital Thermostat, 4.8-Gallon Bath
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Micro Matic FC-8000 is an air-cooled flash chiller for dispensing cold beer or wine at special events. It supports two products and provides a 15-foot cooling distance.
A digital thermostat, 4.8-gallon bath, and 20-pound ice bank support chilling performance. The unit includes a cabinet cover and two 30-foot coils.
- Electrical: 115 volts, 60 Hz, single phase, 3.5 amps, NEMA 5-15P plug
- Refrigeration: 1/5 HP compressor using R-134a refrigerant
- Configuration: Vertical pump with 3/8-inch inlet and outlet fittings
Overall Dimensions:
26.3125"W x 15.6875"D x 14.5625"HProduct Weight:
45.0 lbAir-Cooled Chilling
The flash chiller uses an air-cooled refrigeration system.
Two-Product Configuration
The unit is specified for two products.
15-Foot Cooling Distance
The specified cooling distance is 15 feet.
Digital Thermostat
A digital thermostat provides temperature control.
Ice Bank and Bath
The unit has a 20-pound ice bank and 4.8-gallon bath capacity, with two 30-foot coils.
Cabinet Cover Included
A cabinet cover is included.
Refrigeration System
The unit has a 1/5 HP compressor, R-134a refrigerant, and a rated output of 2,200 BTU per hour.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.