Key specifications
- Amps
- 5.5 Amps Each
- Phase
- 1-Phase
- Dimensions
- 84.25"W × 56.0"D × 60.0"H
- Type
- Ice Dispenser
- Style
- Low Profile
- Installation Type
- Floor Model
MGR Equipment LP-2000 Automatic Low-Profile Ice Dispenser with Foot Pedal, 2,000-lb Capacity, Stainless Steel
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The MGR Equipment LP-2000 is an automatic low-profile ice dispenser with foot pedal control and approximately 2,000 lb of bin storage capacity.
- Stainless steel interior and exterior with an aluminum back and galvanized steel bottom.
- Spiral stainless steel auger delivery system and four stainless steel agitators.
- Listed dimensions are 84.25 in W × 56 in D × 60 in H, with height including the 6 in adjustable legs.
- Electrical specification is 208-230 V, 60 Hz, single phase, with three 3/4 HP gear motors and 5.5 amps each.
Overall Dimensions:
84.25"W x 56.0"D x 60.0"HProduct Weight:
2200.0 lbAutomatic Foot Pedal Control
Ice is dispensed by foot pedal control.
Low-Profile Design
The LP-2000 is listed at 60 in high, including its 6 in legs.
Spiral Auger Delivery
A stainless steel spiral auger provides the delivery system.
Stainless Steel Agitation
Four stainless steel agitators are powered by two separate gear motors.
Front and Side Serviceability
The unit is serviceable from the front and sides, with shafts removable from the front.
Adjustable Legs
The unit has 6 in adjustable legs with stainless steel feet.
Multiple Gear Motors
The unit uses three 3/4 HP gear motors.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.