Key specifications

Amps
16.7 Amps
Phase
1-Phase
Dimensions
25.8"W × 29.6"D × 42.3"H
Type
Heated Holding Cabinet
Style
Half-Height
Installation Type
Floor Model
Spec sheet
Metro SKU: C5E5-CFC-U GTIN: 0-41105-03815-4

Metro C5 C5E5-CFC-U Half-Height Mobile Heated Holding & Proofing Cabinet, Clear Door, Adjustable Slides, 6 Sheet Pan Capacity

$1,679.62
/each
Estimated to ship in 9–12 business days
Height
Accessories

Get priority processing and free 1-year protection with PREMIUM Learn about Premium

As low as $155/mo with Credit Key Learn more

Questions before you buy?

Talk to a specialist — usually within 1 hour, 9am–6pm EST.

Questions before you buy?

Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.

Specifications

Type Heated Holding Cabinet
Style Half-Height
Installation Type Floor Model
Material Aluminum
Finish Aluminum
Interior Finish Aluminum
Pan Capacity 6 Sheet Pans; 12 Steam Pans
Pan Size 18 x 26 Inches; 12 x 20 x 2.5 Inches
Compartments 1
Slide Pair Count 6
Slide Centers 4.5 Inches
Slide Adjustment 1.5 Inch Increments
Insulation Non-Insulated
Door Type Clear Door
Door Window Polycarbonate
Door Reversibility Field Reversible
Door Swing 180 Degrees
Controls Thermostatic; Hold/Proof Switch
Control Location Bottom Mounted
Heating Type Forced Convection
Temperature Range 80°F to 190°F
Watts 2000 Watts
Proof Mode Watts 720 Watts
Voltage 120 Volts
Amps 16.7 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-20P
Cord Length 7.5 Inches
Caster Size 5 Inches
Caster Configuration 2 Swivel; 2 Swivel with Brakes
Door Latch Magnetic

Description

C5E5-CFC-U is a half-height, non-insulated mobile heated holding and proofing cabinet with an aluminum body and a clear door with a polycarbonate window.

Thermostatic control provides an 80°F to 190°F operating range. A switch changes the cabinet between holding and proofing operation, while forced convection circulates heated air.

Adjustable universal wire slides support 18 x 26 inch sheet pans and 12 x 20 inch steam pans. The cabinet has six provided slide pairs, five-inch casters, and a field-reversible door.

  • Six 18 x 26 inch sheet pan capacity
  • Twelve 12 x 20 x 2.5 inch steam pan capacity
  • 120-volt, 2000-watt electrical operation with a NEMA 5-20P plug

Use note: The instructions identify this cabinet for hot food holding applications only and state that it is not a re-thermalizing cabinet.

Overall Dimensions:

25.8"W x 29.6"D x 42.3"H

Product Weight:

122.0 lb

Holding and Proofing Modes

A switch changes the cabinet between holding and proofing operation.

Adjustable Universal Slides

Wire slides adjust on 1.5-inch increments and accommodate multiple pan formats.

Clear Field-Reversible Door

The clear door provides visibility into the cabinet and swings 180 degrees for field reversal.

Thermostatic Temperature Control

Thermostatic control supports an operating range of 80°F to 190°F.

Forced Convection Heating

A blower motor and ducted air system circulate heated air through the cabinet.

Mobile Caster Base

Five-inch casters support mobility, with two casters equipped with brakes.

Bottom-Mounted Controls

The control module is mounted at the bottom of the cabinet.

Aluminum Construction

The cabinet body, base, and interior are aluminum.

Frequently Asked Questions

The operating temperature range is 80°F to 190°F.
The provided slide configuration holds six 18 x 26 inch sheet pans or twelve 12 x 20 x 2.5 inch steam pans.
It is rated for 120 Volts, 60 Hz, and 2000 Watts and uses a NEMA 5-20P plug.
Yes. The door is field reversible and has a 180-degree swing.
Yes. It has five-inch casters, with two casters equipped with brakes.
No. This is a non-insulated cabinet.
No. The instructions state that it is not a re-thermalizing cabinet and is for hot food holding applications only.

This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.

The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.

What to have ready on delivery day

  • Count every piece against the delivery receipt.
  • Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
  • Photograph the freight on the truck before it’s moved.
  • If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.

Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.

How to inspect and sign for freight

Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.

If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.

Reporting damage after delivery

Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.

Need help deciding?

Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.

or call (888) 307-5030