Key specifications
- Amps
- 16.7 Amps
- Phase
- 1-Phase
- Dimensions
- 30.0"W × 36.38"D × 44.75"H
- Type
- Holding Cabinet
- Style
- Pass-Thru
- Installation Type
- Floor Model
Metro C5 C595-SFC-UPFC 8-Pan Pass-Thru Holding Cabinet
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Metro C5 C595-SFC-UPFC is a mobile, half-height, pass-thru controlled-humidity heated holding and proofing cabinet with two full glass doors and universal wire slides.
A 6.8-inch touch-screen control system displays cabinet temperature and actual relative humidity. The cabinet accommodates 8 18 x 26-inch pans or 16 12 x 20 x 2.5-inch pans.
- 120-volt electrical configuration with 2,000 watts, 16.7 amps, and a NEMA 5-20P plug.
- Universal wire slides adjust on 1.5-inch increments and are spaced 3 inches on center.
- Stainless steel construction, insulation, 5-inch casters, and a polymer bumper and drip trough combination.
Overall Dimensions:
30.0"W x 36.38"D x 44.75"HProduct Weight:
207.0 lbControlled Humidity
The control system displays actual relative humidity and cabinet temperature with individual control for each.
Touch-Screen Controls
The 6.8-inch high-resolution touch screen supports menu presets, programmable timers, auto-start, alarms, control lock, and USB HACCP data logging.
Pass-Thru Full Glass Doors
The cabinet has two glass doors in a pass-thru configuration.
Universal Wire Slides
Universal wire slides accommodate 18 x 26-inch sheet pans and 12 x 20 x 2.5-inch pans, with adjustment on 1.5-inch increments.
Pan Capacity
Capacity is 8 18 x 26-inch pans or 16 12 x 20 x 2.5-inch pans.
Mobile Construction
The cabinet is mobile and uses 5-inch casters.
Stainless Steel Construction
The cabinet uses Type 304 stainless steel with a polished exterior, stainless steel interior, and insulated construction.
Temperature Control
The specified temperature range is 90°F to 200°F.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.