Key specifications
- Phase
- 1-Phase
- Dimensions
- 96.0"W × 96.0"D × 91.0"H
- Type
- Walk-In Freezer
- Style
- Indoor
- Installation Type
- Floor Model
- Material
- Coated Steel
Spec sheet
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
Master-Bilt QSF7788-C is an indoor walk-in freezer measuring 8' x 8' x 7'7" high and operating at -10°F.
- Factory-supplied floor with a smooth aluminum interior floor surface
- 26 gauge stucco embossed coated steel interior and exterior panels
- Self-closing door with locking deadbolt handle
- Self-contained CPF150PC-S-4 Capsule Pak refrigeration using R290 refrigerant
- 208-230 volt, 60 Hz, single-phase electrical configuration
The walk-in uses full 4-inch foamed-in-place HFO polyurethane insulated panels and includes a 15-year panel warranty and 18-month parts and labor warranty.
Overall Dimensions:
96.0"W x 96.0"D x 91.0"HProduct Weight:
1637.0 lbIndoor Freezer Configuration
Designed for an interior compartment temperature of -10°F.
Walk-In Format
Nominal 8' x 8' dimensions with a 7'7" height.
Self-Contained Refrigeration
Uses a CPF150PC-S-4 Capsule Pak refrigeration system with R290 refrigerant.
Coated Steel Panels
Interior and exterior panels are 26 gauge stucco embossed coated steel.
Insulated Construction
Full 4-inch panels are foamed in place with HFO polyurethane insulation.
Factory-Supplied Floor
Includes a floor with a smooth aluminum interior floor surface.
Self-Closing Door
The door includes a locking deadbolt handle.
Electrical Configuration
Specified for 208-230 volts, 60 Hz, single-phase power.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.