Key specifications
- Phase
- 1-Phase
- Dimensions
- 96.0"W × 168.0"D × 91.0"H
- Type
- Walk-In Freezer
- Style
- Indoor
- Installation Type
- Floor Model
- Material
- Coated Steel
Spec sheet
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Master-Bilt QS Series QSF77814-C is an indoor walk-in freezer measuring 8 ft wide by 14 ft deep by 7 ft 7 in high. It includes a floor, -10°F operation, and a ceiling-mounted R290 Capsule Pak ECO refrigeration system.
- 26-gauge stucco embossed coated steel interior and exterior panels
- 4-inch foamed-in-place polyurethane-insulated panels
- Smooth aluminum interior floor
- Self-closing door with deadbolt locking handle
- LogiTemp electronic controller and digital thermometer
- Low-profile LED interior light
Overall Dimensions:
96.0"W x 168.0"D x 91.0"HProduct Weight:
1990.0 lbIndoor -10°F freezer
Designed for indoor frozen-storage operation at a specified temperature of -10°F.
Floor-included construction
Includes a smooth aluminum interior floor.
Coated steel panels
Interior and exterior panels use 26-gauge stucco embossed coated steel.
Foamed-in-place insulation
Panels are 4 inches thick and insulated with foamed-in-place polyurethane.
Self-closing locking door
The door includes a spring-actuated closer and deadbolt locking handle with inside safety release.
Capsule Pak ECO refrigeration
The ceiling-mounted self-contained system uses R290 refrigerant and is identified as CPF175PC-S-4.
Electronic temperature control
The system uses a LogiTemp electronic controller, and the door frame includes a digital thermometer.
LED lighting
A low-profile LED light is positioned above the door.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.