Key specifications
- Phase
- 1-Phase
- Dimensions
- 72.0"W × 96.0"D × 91.0"H
- Type
- Walk-In Freezer
- Style
- Self-Contained
- Installation Type
- Floor Model
- Installation Environment
- Indoor
Spec sheet
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Master-Bilt QSF7768-C is an indoor walk-in freezer measuring 6' x 8' x 7'7" and equipped with a floor and self-contained R290 Capsule Pak refrigeration.
Its 26-gauge embossed coated-steel panels use 4-inch foamed-in-place polyurethane insulation. The self-closing door features a locking deadbolt handle, while the refrigeration system is specified for -10°F freezer operation.
- 270 cu. ft. capacity
- Smooth aluminum interior floor
- 115-volt, 60 Hz, single-phase electrical service
Overall Dimensions:
72.0"W x 96.0"D x 91.0"HProduct Weight:
1420.0 lbSelf-Contained Refrigeration
The CPF100PC-S-0 Capsule Pak refrigeration system uses R290 refrigerant.
-10°F Freezer Operation
The exact product is specified as an indoor -10°F freezer.
Insulated Panels
The walk-in uses 4-inch foamed-in-place polyurethane-insulated panels.
Coated-Steel Construction
Interior and exterior surfaces use 26-gauge embossed coated steel.
Floor Included
The supplied floor has a smooth aluminum interior surface.
Self-Closing Door
The door is self-closing and includes a locking deadbolt handle.
Indoor Condensate Evaporation
Indoor Capsule Pak systems use automatic condensate evaporation.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.