Key specifications
- Phase
- 1-Phase
- Dimensions
- 72.0"W × 72.0"D × 91.0"H
- Type
- Walk-In Freezer
- Installation Type
- Floor Model
- Material
- Coated Steel
- Finish
- Coated Steel
Spec sheet
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The QSF7766-C is an indoor 6' x 6' walk-in freezer with a floor and a -10°F freezer temperature. It uses self-contained Capsule Pak refrigeration with R290 refrigerant and operates on 115V, 60 Hz, single-phase power.
- 196 cu. ft. capacity
- 7' 7" nominal height
- 26 gauge embossed coated-steel panel finish
- Self-closing door with deadbolt locking handle
- Smooth aluminum interior floor
- Four-inch foamed-in-place polyurethane-insulated panels
Overall Dimensions:
72.0"W x 72.0"D x 91.0"HProduct Weight:
1252.0 lbIndoor -10°F Freezer
Configured for indoor use at a -10°F freezer temperature.
Self-Contained Refrigeration
Includes Capsule Pak refrigeration using R290 refrigerant.
Floor Included
This model is specified with a floor.
Embossed Coated-Steel Panels
The walk-in panels use 26 gauge embossed coated steel for the interior and exterior finish.
Self-Closing Door
The door includes a spring-actuated closer.
Deadbolt Locking Handle
The door has a locking deadbolt handle.
Insulated Panels
The panels are 4 inches thick and foamed in place with polyurethane insulation.
Smooth Aluminum Interior Floor
The interior floor surface is smooth aluminum.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.