Key specifications
- Phase
- 1-Phase
- Dimensions
- 72.0"W × 144.0"D × 91.0"H
- Type
- Walk-In Freezer
- Installation Type
- Floor Model
- Installation Environment
- Indoor
- Material
- Coated Steel
Spec sheet
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Master-Bilt QS Series QSF77612-C is an indoor walk-in freezer designed for -10°F operation. It measures 6 ft x 12 ft x 7 ft 7 in and is supplied with a floor.
The freezer features 26-gauge coated steel interior and exterior surfaces, a smooth aluminum interior floor, and 4-inch foamed-in-place polyurethane insulation. Its self-contained CPF175PC-S-4 R290 Capsule Pak refrigeration system is paired with a self-closing door and locking deadbolt handle.
- 418 cubic feet of listed capacity
- 230 V, 60 Hz, single-phase refrigeration system
- Digital thermometer and light switch
Overall Dimensions:
72.0"W x 144.0"D x 91.0"HProduct Weight:
1781.0 lbIndoor -10°F Operation
Designed for an interior compartment temperature of -10°F.
Self-Contained Refrigeration
Uses the CPF175PC-S-4 R290 Capsule Pak refrigeration system.
Floor Included
This 77 Series model is supplied with a floor with a smooth aluminum interior surface.
Coated Steel Construction
Interior and exterior surfaces use 26-gauge coated steel with an embossed finish.
Polyurethane Insulation
Four-inch panels are foamed in place with polyurethane insulation.
Self-Closing Door
The door includes a locking deadbolt handle.
Temperature Monitoring
Standard QS Series features include a LogiTemp electronic controller, digital thermometer, and light switch.
Quick Ship
The authoritative specification identifies this model as Quick Ship.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.