Key specifications
- Phase
- 1-Phase
- Dimensions
- 120.0"W × 168.0"D × 91.0"H
- Type
- Walk-In Cooler
- Installation Type
- Floor Model
- Installation Environment
- Indoor
- Material
- Coated Steel
Spec sheet
Master-Bilt QS Series QSB771014-C Indoor 10' x 14' Walk-In Cooler with Floor, R290 Refrigeration, 115V
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Master-Bilt QS Series QSB771014-C is an indoor 10' x 14' walk-in cooler with a floor, a nominal height of 7'-7", and a +35°F cooler specification.
- R290 Capsule Pak refrigeration with 115V/60/1-phase electrical service
- 26 gauge embossed coated steel interior and exterior
- Smooth aluminum interior floor
- Self-closing door with locking deadbolt handle
- 860 cu. ft. capacity
Overall Dimensions:
120.0"W x 168.0"D x 91.0"HProduct Weight:
2487.0 lbIndoor walk-in cooler
Configured for indoor use with a 10' x 14' nominal footprint and 7'-7" nominal height.
Integrated floor
Supplied with a floor featuring a smooth aluminum interior surface.
R290 Capsule Pak refrigeration
Specified with CPB075PC-S-0 R290 Capsule Pak refrigeration.
Self-closing door
The door is specified as self-closing.
Deadbolt locking handle
The door includes a locking deadbolt handle.
Coated steel panels
Interior and exterior surfaces use 26 gauge embossed coated steel.
Insulated panels
QS Series panels are 4 inches thick with foamed-in-place polyurethane insulation.
Electronic controller
The Capsule Pak refrigeration system uses a LogiTemp electronic controller system.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.