Key specifications
- Phase
- 1-Phase
- Dimensions
- 120.0"W × 120.0"D × 91.0"H
- Type
- Walk-In Cooler
- Installation Type
- Floor Model
- Material
- Coated Steel
- Country of Origin
- USA
Spec sheet
Master-Bilt QS Series QSB771010-C 10' x 10' Indoor Walk-In Cooler with Floor, 7'7" High, Self-Contained R290 Refrigeration
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Master-Bilt QSB771010-C is an indoor 10' x 10' walk-in cooler with a floor, 7'7" height, and self-contained R290 refrigeration.
- Provides 602 cu. ft. of cooler capacity.
- Includes 4-inch foamed-in-place HFO polyurethane insulated panels.
- Features 26 gauge embossed coated steel interior and exterior surfaces with a smooth aluminum interior floor.
- The door is self-closing and includes a deadbolt locking handle.
- Operates on 115 Volts, 60 Hz, single-phase power.
Overall Dimensions:
120.0"W x 120.0"D x 91.0"HProduct Weight:
2033.0 lbSelf-Contained R290 Refrigeration
The CPB050PC-S-0 Capsule Pak refrigeration system is specified with R290 refrigerant for this indoor cooler.
Floor-Included Walk-In
The walk-in includes a floor and measures 10' x 10' x 7'7".
Insulated Panels
The panels are 4 inches thick and insulated with foamed-in-place HFO polyurethane.
Coated Steel Surfaces
The interior and exterior use 26 gauge embossed coated steel; the interior floor is smooth aluminum.
Self-Closing Door
The door is self-closing and includes a deadbolt locking handle.
Electronic Controller
The refrigeration system uses a LogiTemp electronic controller.
Indoor Cooler Operation
The unit is specified as an indoor +35°F cooler.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.