Key specifications
- Phase
- 1-Phase
- Dimensions
- 96.0"W × 168.0"D × 88.0"H
- Type
- Walk-In Cooler
- Style
- Floorless
- Installation Type
- Floor Model
- Material
- Steel
Spec sheet
Master-Bilt QS Series QSB74814-C Indoor Floorless Walk-In Cooler with Self-Contained R290 Refrigeration, 8' x 14' x 7'4" H
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Master-Bilt QS Series QSB74814-C is an indoor, floorless walk-in cooler measuring 8 ft by 14 ft by 7 ft 4 in and providing 675 cu. ft. of refrigerated storage at +35°F.
Its self-contained Capsule Pak refrigeration system uses R290 refrigerant and operates on 115 volts, 60 Hz, single-phase power.
- 26 gauge embossed coated steel interior and exterior panels
- Self-closing door with locking deadbolt handle
- 4 in. foamed-in-place polyurethane-insulated panels
- Floorless design supplied with NSF-listed vinyl floor sealers
Overall Dimensions:
96.0"W x 168.0"D x 88.0"HProduct Weight:
1807.0 lbSelf-Contained Refrigeration
Capsule Pak refrigeration with R290 refrigerant is contained in a single system.
Floorless Construction
Floorless models are supplied with NSF-listed vinyl floor sealers.
Insulated Panels
Panels are 4 in. thick and foamed in place with polyurethane insulation.
Coated Steel Panels
Interior and exterior panels use 26 gauge embossed coated steel.
Door Hardware
The door is self-closing and includes a locking deadbolt handle with an inside safety release.
Temperature Control
The refrigeration system uses a LogiTemp electronic controller, and the door frame includes a digital thermometer.
LED Lighting
A low-profile LED light is positioned above the door.
Indoor Condensate Management
Indoor systems use automatic condensate evaporation.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.