Key specifications
- Phase
- 1-Phase
- Dimensions
- 120.0"W × 168.0"D × 88.0"H
- Type
- Walk-In Cooler
- Style
- Floorless
- Installation Type
- Floor Model
- Material
- Coated Steel
Spec sheet
Master-Bilt QS Series QSB741014-C 10' x 14' Indoor Floorless Walk-In Cooler with Self-Contained R290 Refrigeration
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Master-Bilt QS Series QSB741014-C is a 10' x 14' floorless indoor walk-in cooler with an 860 cu. ft. capacity and a +35°F cooler temperature.
- Self-contained CPB100PC-S-0 Capsule Pak refrigeration uses R290 refrigerant and operates at 115 Volts, 60 Hz, single phase.
- 26-gauge stucco embossed coated steel is used for the interior and exterior finish.
- Four-inch foamed-in-place polyurethane insulated panels support thermal separation.
- The self-closing door includes a deadbolt locking handle.
- Floorless models are supplied with NSF-listed vinyl floor sealers.
Overall Dimensions:
120.0"W x 168.0"D x 88.0"HProduct Weight:
1985.0 lbFloorless Configuration
Supplied with NSF-listed vinyl floor sealers for installation on an existing floor.
Self-Contained R290 Refrigeration
The CPB100PC-S-0 Capsule Pak refrigeration system uses R290 refrigerant.
Insulated Panels
Four-inch panels are foamed in place with polyurethane insulation.
Coated Steel Construction
Interior and exterior surfaces use 26-gauge stucco embossed coated steel.
Self-Closing Door
The door includes a deadbolt locking handle.
Indoor Cooler Operation
The unit is specified as an indoor +35°F cooler.
Quick Ship
The product is identified as Quick Ship.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.