Key specifications
- Phase
- 1-Phase
- Dimensions
- 120.0"W × 144.0"D × 88.0"H
- Type
- Walk-In Cooler
- Style
- Floorless
- Installation Type
- Floor Model
- Material
- Steel
Spec sheet
Master-Bilt QS Series QSB741012-C Indoor Floorless Walk-In Cooler, 10' x 12' x 7'4" H, Self-Contained R290, 731 Cu. Ft.
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Master-Bilt QS Series QSB741012-C is an indoor, floorless walk-in cooler with a nominal 10' x 12' footprint and 7'4" height.
It uses self-contained R290 Capsule Pak refrigeration for +35°F cooler operation and requires 115 V, 60 Hz, single-phase power.
- 26 gauge embossed coated steel interior and exterior finish
- Self-closing door with locking deadbolt handle
- Floorless configuration supplied with NSF-listed vinyl floor sealers
- Full 4-inch foamed-in-place polyurethane insulated panels
Overall Dimensions:
120.0"W x 144.0"D x 88.0"HProduct Weight:
1832.0 lbQuick Ship
This configuration is identified as Quick Ship.
Floorless Configuration
The floorless model is supplied with NSF-listed vinyl floor sealers.
Self-Contained R290 Refrigeration
The specified refrigeration system uses R290 refrigerant in a self-contained Capsule Pak system.
Coated Steel Finish
The interior and exterior are specified with 26 gauge embossed coated steel.
Self-Closing Door
The walk-in includes a self-closing door.
Locking Deadbolt Handle
The door includes a locking deadbolt handle.
Insulated Panels
The QS Series documentation specifies full 4-inch foamed-in-place polyurethane panels.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.