Key specifications
- Phase
- 1-Phase
- Dimensions
- 72.0"W × 96.0"D × 91.0"H
- Type
- Walk-In Freezer
- Style
- Outdoor
- Installation Type
- Floor Model
- Material
- Steel
Spec sheet
Master-Bilt QS Series QODF7768-C Outdoor Walk-In Freezer, 6' x 8' x 7'7" H, With Floor, Self-Contained R290 Refrigeration, -10°F
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
Master-Bilt QODF7768-C is an outdoor walk-in freezer measuring 6 ft x 8 ft x 7 ft 7 in and specified for -10°F operation. It includes a floor, self-contained R290 Capsule Pak ECO refrigeration, a membrane roof, and 208-230 V single-phase electrical service.
- 26 gauge coated steel interior and exterior panels
- Smooth aluminum interior floor
- Self-closing door with deadbolt locking handle
- Four-inch foamed-in-place polyurethane-insulated panels
- LogiTemp electronic controller and automatic defrost
Overall Dimensions:
72.0"W x 96.0"D x 91.0"HProduct Weight:
1552.0 lbSelf-Contained R290 Refrigeration
The CPF150PC-E-0 Capsule Pak ECO refrigeration system uses R290 refrigerant.
Outdoor Construction
The outdoor model includes a membrane roof and trim for weather protection.
Insulated Panels
Four-inch panels use foamed-in-place HFO polyurethane insulation.
Coated Steel Panels
Interior and exterior panels use 26 gauge embossed coated steel.
Included Floor
The walk-in includes a smooth aluminum interior floor.
Door Security
The self-closing door has a deadbolt locking handle.
Electronic Control
The system uses a LogiTemp electronic controller with automatic defrost.
Electrical Service
The specified electrical service is 208-230 V, 60 Hz, single-phase.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.